top of page
Tamron Tele Converter 2.0X ( TC-X20)
Tamron introduced two tele converter models exclusively for select Tamron lenses. These accessories make it easy to expand the versatility of the attached lens. TELE CONVERTER 1.4x increases the focal length by a factor of 1.4x, while TELE CONVERTER 2.0x doubles the focal length
Increases maximum focal length
Focal length: 900mm (450mm+2.0x tele converter) Exposure: F/13 1/1000sec ISO500
SP 150-600mm F/5-6.3 Di VC USD G2 (Model A022) with 2.0x tele converter
Although the maximum focal length is increased, the minimum object distance remains nearly the same, so the magnification ratio during close focusing is enhanced. Both tele converters are carefully designed and constructed to preserve the original superior image quality of the lens. The 2.0x model uses one LD (Low Dispersion) lens element to suppress aberrations. BBAR (Broad-Band Anti-Reflection) coatings are deployed on both models to help minimize ghosting and flare.
 
Autofocus and VC (Vibration Compensation) features are retained with compatible lenses
Autofocus functions normally with compatible lenses. (Please refer to Compatible Tamron Lens List below.) VC (Vibration Compensation) performance is maintained.
 
Moisture-Proof and Dust-Resistant Construction
The new tele converters are ideal for use in outdoor photography when matched with any lens that has a Moisture-Resistant Construction because special seals that are dust-resistant and moisture-proof are used at every joint and seam.

Tamron Tele Converter 2.0X ( TC-X20)

₹46,000.00 नियमित मूल्य
₹45,500.00बिक्री मूल्य

  • Technical Information

    Specifications

    Model TC-X14
    Magnification* 1.4x
    Optical Construction 6 elements in 3 groups
    Maximum Diameter φ70mm Canon
    φ62.6mm Nikon
    Length** 21.4mm (0.8 in) Canon and Nikon
    Entire Length*** 34.1mm (1.3 in) Canon
    32.3mm (1.3 in) Nikon
    Weight 205g (7.2 oz) Canon
    180g (6.3 oz) Nikon
    Standard Accessories Mount cap, Rear cap, Lens case
    Compatible Mounts Canon, Nikon

  • Specifications

    Model TC-X20
    Magnification* 2x
    Optical Construction 9 elements in 5 groups
    Maximum Diameter φ69.8mm Canon
    φ62.3mm Nikon
    Length** 53.6mm (2.1 in) Canon and Nikon
    Entire Length*** 66.8mm (2.6 in) Canon
    65mm (2.6 in) Nikon
    Weight 360g (12.7 oz) Canon
    305g (10.8 oz) Nikon
    Standard Accessories Mount cap, Rear cap, Lens case
    Compatible Mounts Canon, Nikon

    Specifications, appearance, functionality, etc. are subject to change without prior notice.

    * Use of the TC-X20 tele converter reduces the effective aperture by two f/stops.
    ** Length is the distance measured from the camera mount face to the lens mount face.
    *** Entire Length is the distance between the tip of the lens and the tip of protrusion.

bottom of page